Flection will touch the road with smooth cornering and low current consumption, and have received great popularity.
Flection Type-T is installed preset data that compatible to Tamiya reguration. Also changed double anodized color to light blue. It is high-end coreless servo.
Preset data were prepared for 5 models that compatible to Tamiya regulations.
BEC out put current of TAMIYA brushless ESC that listed in the TAMIYA regulation is 1.5A. It means if using ESC that need over 1.5A, the possibility of failure will increase. So,If servos receives overload in the crush etc, the possibility of failure are high.
In such a situation, Flection TypeT is designed to make it difficult for a current of 1.5 A or more to flow. But this performance as same as high end servos. Servo that have good operation feeling and decrease possibility of failure in the ESC.
It is Flection TypeT
#Torque: 12.5Kg-cm Speed: 0.09sec/60deg(@7.4V)
#Torque: 11.8Kg-cm Speed: 0.10sec/60deg(@6.0V)
#Dimensions: 40.5×26×21mm (Low Profile)
#Operating voltage: 6.0~7.4V (Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#The hard servo gear shaft
#The aluminum top case
#The aluminum heat sink middle case
#Gold plated connector
1/10 EP on road
Made in Japan.